Image unavailable Alfa Marine Spare Parts is an independent supplier and is not an authorized DEUTZ dealer. DEUTZ names and part numbers are used for identification purposes only.
Product image not available
Request a quote for this part.
DEUTZ Marine Parts
TUBE PRODUCTING MWM TBD 620 V16
Availability: 2-7 days
Shipping: Worldwide
Price
On Request
Quote reference: Part No. 1213 3438
Need help identifying this part?TUBE, PRODUCTING MWM TBD 620 V16 #4
Product Details
Part Number
1213 3438
Description
TUBE, PRODUCTING MWM TBD 620 V16 #4
Brand
DEUTZ
Category
Pistons & Rod
Availability
2-7 days
Shipping
Worldwide
Price
On Request
Product Description
DEUTZ Hose, tube, or pipe 1213 3438
1. Product Overview
DEUTZ Hose, tube, or pipe 1213 3438 is listed under source title “TUBE PRODUCTING MWM TBD 620 V16”. It is classified for Batch 4 as hose, tube, or pipe within the engine fluid, air, or gas routing system. The source record does not establish an exact engine model. Confirm the complete engine model, serial number, arrangement, and installed reference before ordering.
2. Function and Operating Principle
A hose, tube, or pipe routes fluid, air, or gas between engine components. Diameter, length, bends, end fittings, pressure capability, temperature capability, and material must suit the exact circuit.
The line maintains a contained flow path while accommodating the installation geometry. Flexible lines may also isolate vibration and movement; rigid lines depend on correct alignment and support.
3. Application Status
| Manufacturer / brand | DEUTZ |
|---|---|
| Part number | 1213 3438 |
| Component category | Hose, tube, or pipe |
| System | Engine fluid, air, or gas routing |
| Evidence level | C — Component identity only |
| Engine application | Not established by the supplied record |
4. Typical Signs That Inspection May Be Required
| Observation | Possible significance |
|---|---|
| External leakage, staining, or wetness | May indicate cracking, loose connections, seal failure, or abrasion. |
| Kinks, collapse, or internal restriction | Can reduce flow and alter pressure or temperature. |
| Chafing or vibration damage | Shows inadequate clearance, support, or clamp condition. |
| Swelling, hardening, or heat damage | May indicate material deterioration or excessive exposure. |
These observations are inspection triggers rather than a confirmed diagnosis. Evaluate the complete engine system and follow the applicable manufacturer service information.
5. Inspection and Replacement Guidance
- Identify the media and circuit before selecting a line.
- Inspect fittings, clamps, supports, heat shields, and adjacent components.
- Do not force a rigid line into alignment or reuse damaged sealing interfaces.
- Confirm dimensions, fitting orientation, and arrangement-specific routing.
6. Information Required Before Ordering
- Complete engine or equipment model.
- Engine serial number and arrangement or configuration number.
- Installed part reference and clear photographs of the identification label.
- Installation position and related assembly information.
Compatibility notice: Verify 1213 3438 against serial-number-specific parts documentation before purchase or installation. Do not select the component by appearance or part-number similarity alone.