Image unavailable Alfa Marine Spare Parts is an independent supplier and is not an authorized Komatsu dealer. Komatsu names and part numbers are used for identification purposes only.
Product image not available
Request a quote for this part.
Komatsu Marine Parts
TUBE D80A-12
Availability: 2-7 days
Shipping: Worldwide
TUBE D80A-12 #4
Product Details
Part Number
154-01-12530
Description
TUBE D80A-12 #4
Brand
Komatsu
Category
Others
Availability
2-7 days
Shipping
Worldwide
Price
On Request
Product Description
Komatsu Hose, tube, or pipe 154-01-12530
1. Product Overview
Komatsu Hose, tube, or pipe 154-01-12530 is listed under source title “TUBE D80A-12”. It is classified for Batch 7 as hose, tube, or pipe within the engine fluid, air, or gas routing system. The source record does not establish an exact engine model. Confirm the complete engine model, serial number, arrangement, and installed reference before ordering.
2. Function and Operating Principle
A hose, tube, or pipe routes fluid, air, or gas between engine components. Diameter, length, bends, end fittings, pressure capability, temperature capability, and material must suit the exact circuit.
The line maintains a contained flow path while accommodating the installation geometry. Flexible lines may also isolate vibration and movement; rigid lines depend on correct alignment and support.
3. Application Status
| Manufacturer / brand | Komatsu |
|---|---|
| Part number | 154-01-12530 |
| Component category | Hose, tube, or pipe |
| System | Engine fluid, air, or gas routing |
| Evidence level | C — Component identity only |
| Engine application | Not established by the supplied record |
4. Typical Signs That Inspection May Be Required
| Observation | Possible significance |
|---|---|
| External leakage, staining, or wetness | May indicate cracking, loose connections, seal failure, or abrasion. |
| Kinks, collapse, or internal restriction | Can reduce flow and alter pressure or temperature. |
| Chafing or vibration damage | Shows inadequate clearance, support, or clamp condition. |
| Swelling, hardening, or heat damage | May indicate material deterioration or excessive exposure. |
These observations are inspection triggers rather than a confirmed diagnosis. Evaluate the complete engine system and follow the applicable manufacturer service information.
5. Inspection and Replacement Guidance
- Identify the media and circuit before selecting a line.
- Inspect fittings, clamps, supports, heat shields, and adjacent components.
- Do not force a rigid line into alignment or reuse damaged sealing interfaces.
- Confirm dimensions, fitting orientation, and arrangement-specific routing.
6. Information Required Before Ordering
- Complete engine or equipment model.
- Engine serial number and arrangement or configuration number.
- Installed part reference and clear photographs of the identification label.
- Installation position and related assembly information.
Compatibility notice: Verify 154-01-12530 against serial-number-specific parts documentation before purchase or installation. Do not select the component by appearance or part-number similarity alone.