Image unavailable Alfa Marine Spare Parts is an independent supplier and is not an authorized DEUTZ dealer. DEUTZ names and part numbers are used for identification purposes only.
Product image not available
Request a quote for this part.
DEUTZ Marine Parts
TENSIONER BELT TCD2013
Availability: 2-7 days
Shipping: Worldwide
Price
On Request
Quote reference: Part No. 0490 4948
Need help identifying this part?TENSIONER, BELT TCD2013 #4
Product Details
Part Number
0490 4948
Description
TENSIONER, BELT TCD2013 #4
Brand
DEUTZ
Category
Others
Availability
2-7 days
Shipping
Worldwide
Price
On Request
Product Description
DEUTZ Belt-drive component 0490 4948
1. Product Overview
DEUTZ Belt-drive component 0490 4948 is listed under source title “TENSIONER BELT TCD2013”. It is classified for this batch as belt-drive component within the accessory drive system. The source title references TCD2013, but that association has not been independently verified for this batch. Confirm the complete engine model, serial number, and arrangement before ordering.
2. Function and Operating Principle
A belt-drive component transfers rotation from the engine to an accessory or guides and tensions the belt path. Belt profile, effective length, pulley diameter, groove form, alignment, and tensioning arrangement must match.
Friction between the belt and pulley transmits torque while idlers and tensioners control wrap, alignment, and tension. Wear, contamination, misalignment, or bearing condition can reduce drive reliability.
3. Application Status
| Manufacturer / brand | DEUTZ |
|---|---|
| Part number | 0490 4948 |
| Component category | Belt-drive component |
| System | Accessory drive |
| Evidence level | C — Component identity only |
| Engine application | Source title references TCD2013; verification required |
4. Typical Signs That Inspection May Be Required
| Observation | Possible significance |
|---|---|
| Squeal, chirp, or belt dust | May indicate slip, misalignment, contamination, wear, or incorrect tension. |
| Cracking, glazing, fraying, or missing ribs | Shows belt deterioration that requires service. |
| Pulley wobble or bearing noise | Requires inspection of the pulley, shaft, bearing, and mounting. |
| Repeated belt failure | Can indicate alignment, accessory drag, wrong part selection, or tensioning problems. |
These observations are inspection triggers rather than a confirmed diagnosis. Evaluate the complete engine system and follow the applicable manufacturer service information.
5. Inspection and Replacement Guidance
- Inspect the complete belt path and all driven accessories.
- Check pulley grooves, alignment, bearings, tensioner travel, and contamination.
- Use the specified belt and tensioning procedure.
- Confirm belt set quantity, profile, and arrangement.
6. Information Required Before Ordering
- Complete engine or equipment model.
- Engine serial number and arrangement or configuration number.
- Installed part reference and clear photographs of the identification label.
- Installation position and related assembly information.
Compatibility notice: Verify 0490 4948 against serial-number-specific parts documentation before purchase or installation. Do not select the component by appearance or part-number similarity alone.