Image unavailable Alfa Marine Spare Parts is an independent supplier and is not an authorized CUMMINS dealer. CUMMINS names and part numbers are used for identification purposes only.
Product image not available
Request a quote for this part.
CUMMINS Marine Parts
BOX-ALT HC7 (SIDE)
Availability: 2-7 days
Shipping: Worldwide
Price
On Request
Quote reference: Part No. J0319-0219
Need help identifying this part?BOX-ALT HC7 (SIDE) #3
Product Details
Part Number
J0319-0219
Description
BOX-ALT HC7 (SIDE) #3
Brand
CUMMINS
Category
Others
Availability
2-7 days
Shipping
Worldwide
Price
On Request
Product Description
CUMMINS Cover or housing J0319-0219
1. Product Overview
CUMMINS Cover or housing J0319-0219 is listed under source title “BOX-ALT HC7 (SIDE)”. It is classified for Batch 7 as cover or housing within the component enclosure and support system. The source record does not establish an exact engine model. Confirm the complete engine model, serial number, arrangement, and installed reference before ordering.
2. Function and Operating Principle
A cover or housing encloses, supports, aligns, or protects an engine assembly. It may also contain fluid, air, or gas and provide mounting surfaces for bearings, seals, sensors, or connected components.
Machined or formed interfaces locate the enclosed assembly while gaskets, seals, and fasteners maintain the required boundary. Distortion, cracking, surface damage, and incorrect hardware can affect sealing and alignment.
3. Application Status
| Manufacturer / brand | CUMMINS |
|---|---|
| Part number | J0319-0219 |
| Component category | Cover or housing |
| System | Component enclosure and support |
| Evidence level | C — Component identity only |
| Engine application | Not established by the supplied record |
4. Typical Signs That Inspection May Be Required
| Observation | Possible significance |
|---|---|
| Leakage at the joint or shaft opening | May involve the housing, cover, gasket, seal, fasteners, or internal pressure. |
| Cracks, impact marks, or thread damage | Can compromise support, sealing, or attachment. |
| Bearing or shaft misalignment | May involve damaged bores, mounting faces, or adjacent structures. |
| Repeated gasket or seal failure | Requires inspection of flatness, alignment, and system conditions. |
These observations are inspection triggers rather than a confirmed diagnosis. Evaluate the complete engine system and follow the applicable manufacturer service information.
5. Inspection and Replacement Guidance
- Identify the enclosed assembly and all attached components.
- Inspect machined faces, bores, threads, sealing grooves, and mounting points.
- Check associated gaskets, seals, bearings, vents, and fasteners.
- Confirm casting or configuration differences by engine arrangement.
6. Information Required Before Ordering
- Complete engine or equipment model.
- Engine serial number and arrangement or configuration number.
- Installed part reference and clear photographs of the identification label.
- Installation position and related assembly information.
Compatibility notice: Verify J0319-0219 against serial-number-specific parts documentation before purchase or installation. Do not select the component by appearance or part-number similarity alone.